If your Apple TV remote stops working (and you don’t have an iPhone handy), your Apple TV is useless. Fix your Apple TV remote using this guide.

It’s annoying when it happens, but from time to time, your Apple TV remote (or Siri remote) may become unresponsive and stop working. This isn’t ideal, especially when you’re trying to watch movies and binge your favorite shows.

This is often because the Apple TV remote has lost charge or the battery inside (in older models) has completely died. However, there could be other issues causing the problem. You’ll want to fix your Apple TV remote not working if this happen.

Here are some steps you can take to get your Apple TV remote working again.

The leading cause of an unresponsive Apple TV remote is a low battery that needs to be charged. The obvious cause for this is extensive use. However, it can also lose its charge if the remote hasn’t been used for some time.

If you have a so-called “Siri remote,” which comes with modern generations of Apple TVs, you can charge it up with a lightning cable. The one you use for your iPhone will work. You can even plug it into your Mac or PC with the Lightning-to-USB cable. To do this, plug the Lightning port in the bottom of the remote and the USB end into a power source or computer.

Let the remote charge for a half hour to get enough juice to get it working again. Note that a full charge takes up to three hours, so you’ll want to charge it overnight.

There is no Lightning cable if you have an older generation Apple TV. Instead, you’ll need to replace the coin cell battery located on the bottom.

If you need to know the amount of charge left in your remote, you can find out in your Apple TV’s settings menu.

To find the battery level for your Apple TV remote:

Another thing you can try is resetting the remote itself. The steps for resetting a Siri remote are the same for first- and second-generation devices.

To reset your Apple TV remote:

Note: If you have an older Apple TV model, you can restart it by removing the coin cell battery waiting a few seconds, and placing it back in.

You can restart your Apple TV box if your remote is still giving you trouble. Since the remote won’t work, you’ll need to power cycle the device.

To restart your Apple TV, find the power cord and unplug your box. Wait about 15-20 seconds and plug the power cord back into the wall or surge protector.

Unplugging the power cord forces the Apple TV OS to reload and refresh without losing any settings. After it’s back on, see if the remote is working now.

The remote is set to pair with the Apple TV out of the box. However, it may have become disconnected, and you’ll need to manually re-pair it. Power on your Apple TV and ensure that it’s plugged into power and HDMI.

If you have the 1st generation Siri remote, place it 4-inches away from the Apple TV and hold the Volume Up and Menu buttons for five seconds.

For the 2nd generation Siri remote (circular directional control), place it 3-4 inches away from the box and hold the Volume Up and Back buttons for five seconds.

On older generation Apple TV remotes, the process is a bit different. You need to unlink the remote first and then link it again. Next, hold the Menu button and Left Arrow button to unlink it. After that, hold the Menu button and Right Arrow button for six seconds.

If the box is working, but you can’t connect the remote, it’s probably an issue with the remote itself.  Before giving up, try using the Apple TV Remote app. You can run it on an iPhone, iPad, and iPod Touch. It provides all features of the remote, plus it has a built-in keyboard for easier searches.

Note: If you’re an Android user, there isn’t an official app from Apple. However, some recreate the process using a third-party app, but the results will vary. Also, ensure you use a trusted app before installing it on your phone. For example, an Apple TV remote app doesn’t need access to your contacts.

When your Apple TV remote stops working, it can be frustrating. However, using the steps above should get things working for you again. If the steps above don’t work, however, consider contacting Apple Customer Service or buying a new Siri remote online—it works with Apple TV HD and 4K models.

Streaming isn’t the only thing you can do with Apple TV. For example, you can pair a HomePod with it and calibrate your Apple TV using your iPhone.

Your email address will not be published. Required fields are marked *

 Save my name and email and send me emails as new comments are made to this post.

Public profiles on Snapchat give you greater exposure and the chance to reach more users. Here's how to make a public profile...

If you need to transfer your Windows 11 product key or just need it to do a clean install of the OS,...

Backing up your data to the cloud via an automated service is critical. Backblaze is the solution I use and recommend. Here's...

Chrome does an excellent job of storing your browsing history, cache, and cookies to optimize your browser performance online. Hers's how to...

Buying in-store doesn't mean you have to pay higher prices. Thanks to price-matching guarantees, you can get online discounts while shopping in...

Copyright © 2007-2021 groovyPost™ LLC | All Rights Reserved